Adjusting the volume for navigation
announcements
X
Turn cVd the control knob during a
navigation announcement.
or
X
Set the volume of traffic announcements
compared to the volume of the active
audio source (Y page 16).
The volume of the active audio source is
lowered to the selected value for the
duration of the navigation
announcement.
Route information (Expert mode)
Calling up the "Route information" menu
X
Press the arrow at the bottom left of the
map (Y page 39).
The navigation main menu appears.
X
Press Route information.
The "Route information" menu appears.
Calling up a route list
X
Press Directions in the "Route
information" menu.
The route list shows the street sections
yet to be traveled.
X
Press 9 or : to scroll in the list.
X
To close the route list: press &.
Setting the map to a route position
X
Press Go to... in the "Route
information" menu (Y page 42).
A menu appears.
X
Press Current position, Destination
area, Overview or Start area.
The map shows the route section with the
selected route position or a complete
overview of the route.
Blocking a section of the route
It is possible to block more than one route
section. The number of active blocks can be
seen in the "Length of avoided route" and
"Start of avoided route" lists at the top
right.
X
Press Avoid route in the "Route
information" menu (Y page 42).
The "Length of avoided route" list
appears.
X
Press a selection option, e.g. 5 km, to
select the extension of the block.
The "Start of avoided route" list
appears.
42
>> smart high line radio.
To Next Page
Loading...
