Adjusting the volume of the confirmation
tone (beep)
Some functions, such as storing a radio
station, are acknowledged with a
confirmation tone. You can adjust the
volume of the confirmation tone.
X
Call up the volume settings menu
(Y page 17).
The entry on the right beside Beep shows
the current setting.
X
Press Beep in the menu.
A settings menu appears.
X
Press = or Ì to adjust the volume.
You can set values between 0 (switched
off) and 3 (loud).
X
To confirm the setting: press OK.
The volume settings menu appears.
Adjusting the click volume
Entries that you make by pressing briefly
on the screen are accompanied by a tone
(click). You can adjust the volume of this
click.
X
Call up the volume settings menu
(Y page 17).
The entry on the right beside Click shows
the current setting.
X
Press : until the Click entry
appears.
X
Press Click.
A settings menu appears.
X
Press = or Ì to adjust the volume.
You can set values between 0 (switched
off) and 6 (loud).
X
To confirm the setting: press OK.
The volume settings menu appears.
Screen settings
Calling up the screen settings menu
X
Press Extras in the main menu
(Y page 8).
X
Press Options in the extras menu.
The general settings menu appears.
X
Press Display settings.
Dimming the screen
The brightness set in the brightness sensor
(Y page 6) (item A) of the smart high line
radio affects the setting options for this
function.
When you dim the screen, adjust the display
lighting accordingly. You can choose
between automatic or manual setting.
X
Call up the screen settings menu
(Y page 19).
The entry on the right beside Dimming
shows the current setting.
X
Select Dimming.
A menu appears.
X
Automatic setting: press Automatic
first and then press &.
The setting is accepted and the screen
settings menu appears.
X
Manual setting: press Manual.
A settings menu appears.
X
Press = or Ì to select a value
between 0 (very dark) and 16 (bright) for
the dimmer.
>> smart high line radio.
19
Z
To Next Page
Loading...
