SMART high line radio - Functions Available During a Call; Using the Phone Book

Functions available during a call
Transferring a hands-free call to the
mobile phone
The display shows either the phone number
or the name.
The following information is shown in the
display during a call:
R
type of connection (hands-free, mobile
phone)
R
name or phone number of the caller
R
call duration
X
Press the symbol on the bottom right.
You are now conducting the call using the
mobile phone. Call active: Handset is
shown in the display.
X
To return to the call using the hands-
free system: press the symbol again.
Adjusting the call volume
Option 1
X
Turn cVd the control knob.
Option 2
X
Call up the volume settings menu and set
the volume for telephone calls
(Y page 18).
Ending a call
X
Press 1.
The call is ended and the previous
display appears.
Using the phone book
Introduction
The smart high line radio shows the mobile
phone's phone book (Contacts I) and the
smart high line radio's phone book
(Contacts II). The contacts in the phone
book in the mobile phone are automatically
downloaded when the mobile phone is
connected (Y page 56). They are updated
after every call and after the mobile phone
is connected again. You can also download
the contacts from the mobile phone
yourself (Y page 65).
Mobile phone contacts can be stored
permanently in the smart high line radio's
phone book. These are then available
independently of the mobile phone
connected.
Phone book in the mobile phone (Contacts
I)
Opening the phone book
Option 1: the phone book in the mobile
phone is shown as soon as downloading is
complete.
X
Option 2: press Contacts I in the
telephone menu.
60
>> smart high line radio.