SMART high line radio - Displaying Product Information; Navigation System

Setting the language
You can use this function to determine the
language for the menu displays and the
navigation announcements. The selected
language affects the characters available
for entry. When you set the system language,
the language for the Voice Control System
changes at the same time (Y page 52). If
the Voice Control System does not support
this language, voice commands are not
possible.
X
Call up the system settings menu
(Y page 21).
The entry on the right beside Language
shows the current setting.
X
Press Language.
The list of languages appears. The
currently selected language is
identified by the O symbol.
X
Press 9 or : to scroll in the list.
X
Select the desired language.
The smart high line radio loads the
language and switches back to the system
settings menu.
Selecting a keyboard
The keyboard selection affects the
selection options in the input menus
(keyboard layout, special character entry).
You can select the following keyboard
settings:
R
Alphabetical
R
German (German "QWERTZ" computer
keyboard)
R
English (UK)
R
French
R
Cyrillic
X
Call up the system settings menu
(Y page 21).
The entry on the right beside Keyboard
shows the current setting.
X
Press Keyboard.
A list appears.
X
Select the desired keyboard.
The smart high line radio loads the
keyboard and switches back to the system
settings menu.
Setting the standby time
The smart high line radio uses less power
in standby mode (energy-saving operating
mode).
The smart high line radio switches to
standby mode after it has been switched
off. In this mode, the device is ready for
use quickly after being switched on again.
Standby mode is terminated after a defined
time period (standby time). The device is
then switched off. You can set the standby
time individually.
i
The standby time is preset to 18 h.
Setting a low standby time is
recommended when, for example, the
battery charge is low.
If the smart high line radio is operated
while the engine is switched off, the
device also goes into standby mode after
30 minutes. You will see a warning
message to this effect.
X
Call up the system settings menu
(Y page 21).
The entry on the right beside Standby
time shows the current setting.
X
Press Standby time in the menu.
A settings menu appears.
22
>> smart high line radio.