Adding a destination
X
Press Add destination.
The new destination menu appears.
X
Select destination entry.
Entering an address (Y page 29)
Last locations (Y page 35)
Current position (if available)
Points of interest (Y page 36)
X
Select option 1.
Favorites (Y page 35)
X
Press OK in the detailed information
menu (Y page 31).
The destination is entered in the edit
route menu.
X
To calculate a new route: press OK.
Optimizing a route
This function is available when there are
four or more entries (including the
starting point and the destination).
X
Press Optimize route in the edit route
menu.
The order of the destinations is checked
and the route is optimized according to
the distance. The route's starting point
and destination are not changed.
Changing the order of the destinations
within the route
X
Press the up or down arrow in the edit
route menu.
The destination is moved up or down.
Deleting a destination from the route
X
Press 1 after an entry in the edit route
menu.
The destination is deleted from the
route.
Loading/saving a route
X
Press the memory card symbol in the edit
route menu (Y page 44).
The loading and saving a route menu
appears.
X
To save a route: press Save current
route.
An input menu appears.
X
Enter a name for the route and then press
OK.
The route is stored.
X
To load a route: press an entry.
The route is loaded.
X
To delete a route: press 1 after an
entry.
Recording the GPS track (Expert mode)
If this function is activated and an SD/MMC
memory card has been inserted
(Y page 72), the route taken is recorded.
The route is saved as a GPX file in the "GPS
tracks" folder on the SD/MMC memory card.
44
>> smart high line radio.
To Next Page
Loading...
