NOTE!
WPS2 cannot be used because password entry is not possible on the SMARTFOX.
In this case, use the connection via the access point.
5.
Enter the WLAN password and click on "OK".
SMARTFOX deactivates the access point and connects to the registered WLAN or
Internet.
6.
Connect your laptop, smartphone... to the same network that was selected on
the SMARTFOX. The SMARTFOX can now be reached locally via the obtained IP
address or http://dafi-smartfox. If the WLAN is Internet-enabled, the SMARTFOX
can now be connected to the web portal my.smartfox.at.
Connection WLAN via WPS
1. Press the WPS button on your router
2. On the SMARTFOX, set the WIFI WPS setting to "ON".
The SMARTFOX now connects to the router's transmitted WLAN.
20
To Next Page
Loading...