HGM6100U Series Automatic Control Module
HGM6100U Automatic Genset Controller ISSUE 2014-10-28 Version 1.2 Page 16 of 39
No. Items Description
16
Temp. Sensor
Open Circuit
When sensor hasn’t connected to corresponding port,
controller will send shutdown alarm signal and it will be
displayed in LCD.
17
Oil Pressure
Sensor Open
Circuit
When sensor hasn’t connected to corresponding port,
controller will send shutdown alarm signal and it will be
displayed in LCD.
18
Maintenance time
out shutdown
When genset running is longer than maintenance time of
user setting, and maintenance action is set as shutdown,
controller send shutdown alarm signal and it will be
displayed in LCD. When maintenance action type is set as
“Not used”, maintenance alarm reset.
To Next Page
Loading...
