C
ONFIGURING
P
RINTER
S
ERVICES
6-5
3. Specify the printer type attached to the Barricade.
4. Select the monitored port (the default port name is “SMC100”)
and then click the “Configure Port” button.
5. Enter the IP address of the Barricade and click “OK,” and then
click “Next” in the Add Printer Wizard dialog box.
6. Continue following the prompts to finish installing the Barricade
print server. The printer type you specified will now be added to
your “Printers” menu.
To Next Page
Loading...
