SMC Networks Barricade SMC7004ABR User Manual

I NSTALLATION
2-6
You should also remember to turn off the power, remove the
power cord from the outlet, and keep your hands dry when you
install the Barricade.
Basic Installation Procedure
1. Connect the LAN: You can connect the Barricade to your PC,
or to a hub or switch. Run Ethernet cable from one of the LAN
ports on the front of the Barricade to your computer’s network
adapter or to another network device.
2. Connect the WAN: Prepare an Ethernet cable for connecting the
Barricade to a Cable/xDSL modem or Ethernet router. Prepare a
serial cable for connecting the Barricade to an ISDN TA or PSTN
modem.
3. Connect your printer: Use standard parallel printer cable to
connect your printer to the printer port on the Barricade.
4. Power on: Connect the power adapter to the Barricade.
Figure 2-2. Connecting the Barricade
Internet
Internet
Access
Device
SMC7004ABR
Broadband Router
SOHO Office or Residence
SMC7004ABR
R
e
s
e
t
P
o
w
e
r
WAN
1
0
/
1
0
0
L
i
n
k
/
A
c
t
1
2
3
4
L
A
N
1
2
3
4

SMC Networks Barricade SMC7004ABR Specifications

General

Brand	SMC Networks
Model	Barricade SMC7004ABR
Category	Network Router
Language	English