N
ETWORKING
AND
C
LIENT
S
ERVICES
4-8
Set Time Zone
Set the time zone for the Barricade. This information is used for log
entries and client filtering.
LAN Gateway and DHCP Settings
Configure the gateway address of the Barricade. To dynamically
assign the IP address for client PCs, enable the DHCP Server, set
the lease time, and then specify the address range. Also remember
to configure all of your client PCs for dynamic address allocation.
Valid IP addresses consist of four numbers, and are separated by
periods. The first three fields are the network portion, and can be
from 0–255, while the last field is the host portion and can be from
1–254. However, remember not to include the gateway address of
To Next Page
Loading...
Need help?
General
