C
ONFIGURING
C
LIENT
TCP/IP
5-23
Step 3. Obtain IP Settings From Your Barricade
Now that you have configured your computer to connect to your
Barricade, it needs to obtain new network settings. By releasing any
old IP settings and renewing them with settings from your Barricade,
you will also verify that you have configured your computer
correctly.
1. From the Windows
desktop, click the
"Start" button, then
"Programs," and then
select "Command
Prompt."
2. In the "Command
Prompt" window,
type "IPCONFIG /
RELEASE" and press
the <ENTER> key.
To Next Page
Loading...
