C
ONFIGURING
THE
B
ARRICADE
4-64
SNMP
Community
Click SNMP and then Community to access the screen below.
Use the SNMP configuration screen to display and modify parameters for
the Simple Network Management Protocol (SNMP). A computer attached
to the network, called a Network Management Station (NMS), can be used
to access this information. Access rights to the agent are controlled by
community strings. To communicate with the Barricade, the NMS must
first submit a valid community string for authentication.
Note: Up to 5 community names may be entered.
Parameter Description
Community A community name authorized for management access.
Access Management access is restricted to Read Only (Read) or
Read/Write (Write).
Valid Enables/disables the entry.
To Next Page
Loading...
Need help?
General
