C
ONNECT
THE
S
YSTEM
2-9
Connect the Power Adapter
Plug the power adapter into the power socket on the side panel of the
Barricade, and the other end into a power outlet.
Check the power indicator on the front panel is lit. If the power i
ndicator is
not lit, refer to
“Troubleshooting” on page A-1.
In case of a power input failure, the Barricade will automatically restart and
begin to operate once the input power is restored.
If the Barricade is properly configured, it will take about 30 seconds to
establish a connection with the ADSL service provider after powering up.
To Next Page
Loading...
