SMC Networks Barricade SMCWBR14T-G - TCP;IP Configuration

To Next Page

To Previous Page

TCP/IP C

ONFIGURATION

3-2

TCP/IP Configuration

To access the Internet through the Barricade, you must configure the

network settings of the computers on your LAN to use the same IP subnet

as the Barricade. The default network settings for the Barricade are:

IP Address: 192.168.2.1

Subnet Mask: 255.255.255.0

Note: These settings can be changed to fit your network requirements,

but you must first configure at least one computer to access the

Barricade’s web configuration interface in order to make the

required changes. (See “Configuring the Barricade” on page 4-1

for instructions on configuring the Barricade.)

Other manuals for SMC Networks Barricade SMCWBR14T-G