S
ECURITY
4-43
Wireless Encryption
The Barricade can transmit your data securely over a wireless network.
Matching security mechanisms must be set up on your Barricade and your
wireless client devices. Select the most suitable security mechanism from
the drop-down list on this screen.
Click Save Settings to proceed, or Cancel to change your settings.
Parameter Description
No WEP, No WPA/WPA2 Disables all wireless security. To make it easier to
set up your wireless network, we recommend
enabling this setting initially. By default, wireless
security is disabled.
WEP Only Once you have your wireless network in place, the
minimum security we recommend is to enable the
legacy security standard, Wired Equivalent Privacy
(WEP). See “WEP” on page 4-45.
WPA/WPA2 Only For maximum wireless security, you should enable
the WPA/WPA2 option. See “WPA/WPA2” on
page 4-47.
To Next Page
Loading...
Need help?
General
