In order to use this product safely, be sure to read and follow the instructions given in "Pressure
switches/Flow switches common precautions" which can be found under "Handling Precautions for
SMC Products" on the SMC website, before use.
This operation manual is intended for those who have knowledge of machinery using pneumatic
equipment, and have sufficient knowledge of assembly, operation and maintenance of such
equipment. Only those persons are allowed to perform assembly, operation and maintenance.
Read and understand this operation manual carefully before assembling, operating or providing
maintenance to the product.
About this product
This product is not designed to be explosion proof.
Do not use a fluid containing chemicals, synthetic oils including organic solvent, salt and
corrosive gases.
Otherwise damage to the product, malfunction and failure can result.
Writing time of input data to product is 1000000 times.
Design
The product should be positioned higher than the detection nozzle.
If the product is positioned lower than the detection nozzle, water or oil may enter the detection port, causing a
malfunction or operational failure.
Do not use multiple detection nozzles with one product.
Correct measurement may not be possible. If multiple nozzles are to be used, please test them on the actual
equipment. It is necessary for the user to verify correct operation.
To Next Page
Loading...
Need help?
General
