SMC Networks JXC Series User Manual

q
18
How to Order
Actuator part number
Without cable specifi cations and actuator options
Example: Enter “LEFS16B-100”
for the LEFS16B-100B-S1.
BC
Blank controller
∗
1
∗1 Requires dedicated software (JXC-BCW)
A blank controller is a controller to which the customer can write the data of the actuator it is to be combined and used with. Use the
dedicated software (JXC-BCW) for data writing.
• Please download the dedicated software (JXC-BCW) via our website.
• Order the communication cable for controller setting (JXC-W2A-C) and USB cable (LEC-W2-U) separately to use this software.
SMC website: https://www.smc.eu
Precautions for blank controllers (JXC-BC)
Confi rm that the combination of the controller and actuator is correct.
The controller is sold as single unit after the compatible actuator is set.
∗ Refer to the operation manual for using the products. Please download it via our website: https://www.smc.eu
q Check the actuator label for the model number. This number should match that of
the controller.
JXC 7 T
∗1 The DIN rail is not included. It
must be ordered separately.
(Refer to page 25.)
Mounting
7
Screw mounting
8
∗
1
DIN rail
∗ Select “—” for anything other than JXCD 1 and
JXCM1.
Option
—
Without option
S
With straight type communication plug
T
With T-branch type communication plug
Step Motor Controller
JXCE1/91/P 1/D1/L/M1 Series
D
Communication protocol
Standard
With STO
sub-function
E
EtherCAT

—
9
EtherNet/IP™

—
P
PROFINET

—
D
DeviceNet
®

—
L
IO-Link

M
CC-Link

—
1
Number of axes, Special specifi cation
1
1 axis, Standard
F
1 axis, With STO sub-function
r
∗ Excluding
the JXCLF
With STO
sub-function

SMC Networks JXC Series Specifications

General

Brand	SMC Networks
Model	JXC Series
Category	Controller
Language	English