SMC Networks JXC Series User Manual

How to Order
Specifi cations
Model
JXC51
JXC61
Compatible motor Step motor (Servo/24 VDC)
Power supply Power voltage: 24 VDC ±10%
Current consumption (Controller) 100 mA or less
Compatible encoder Incremental/Battery-less absolute
Parallel input 11 inputs (Photo-coupler isolation)
Parallel output 13 outputs (Photo-coupler isolation)
Serial communication RS485 (Only for the LEC-T1 and JXC-W2)
Memory EEPROM
LED indicator PWR, ALM
Cable length [m] Actuator cable: 20 or less
Cooling system Natural air cooling
Operating temperature range [°C] 0 to 55°C (No freezing)
Operating humidity range [%RH] 90 or less (No condensation)
Insulation resistance [MΩ] Between all external terminals and the case: 50 (500 VDC)
Weight [g] 150 (Screw mounting), 170 (DIN rail mounting)
Controller
(Step Data Input Type)
JXC51/61 Series
JXC 5 1
71
we rq
w
Mounting
7
Screw mounting
8
∗
1
DIN rail
e I/O cable length [m]
—
None
1
1.5
3
3
5
5
q Parallel I/O type
5
NPN
6
PNP
r Actuator part number
Without cable specifi cations and actuator options
Example: Enter “LEFS25B-100” for the
LEFS25B-100B-R1.
BC
Blank controller
∗
1
∗1 The DIN rail is not included.
It must be ordered separately.
∗1 Requires dedicated software (JXC-BCW)
Confi rm that the combination of the controller and
actuator is correct.
A blank controller is a controller to which
the customer can write the data of the
actuator it is to be combined and used
with. Use the dedicated software (JXC-
BCW) for data writing.
• Please download the dedicated software
(JXC-BCW) via our website.
• Order the communication cable for con-
troller setting (JXC-W2A-C) and USB ca-
ble (LEC-W2-U) separately to use this
software.
SMC website
https://www.smc.eu
The controller is sold as single unit after the
compatible actuator is set.
Precautions for blank controllers
(JXC1-BC)
<Check the following before use.>
q Check the actuator label for the
model number. This number should
match that of the controller.
w Check that the Parallel I/O
confi guration matches (NPN or PNP).
∗ Refer to the operation manual for using the products. Please download it via our website:
https://www.smc.eu
q w
8

SMC Networks JXC Series Specifications

General

Brand	SMC Networks
Model	JXC Series
Category	Controller
Language	English