- 5 -
No.JXC※-OMW1019-A
2. Product Outline
2.1 Product features
This controller can provide the JOG operation and teaching operation by switching the functions using
the MODE input.
●
U
32 points positioning / pushing are available (MODE
＝
OFF)
Control the electric actuator according to the step data specified by the input of parallel I/O.
It is possible to set up various parameters for each operation pattern.
●
U
Jog operation is available via the parallel I/O (MODE
＝
ON)
It is possible to instruct the jog operation using JOG- input and JOG+ input via the parallel I/O.
● Teaching is available via parallel I/O (MODE=ON)
It is possible to register the current position in the step data via the parallel I/O.
Please keep this manual safe for future use. It will be necessary to refer to this manual along with the
operation manuals for other electric actuators, teaching box, and controller setting kit at installation and
fault finding.
Keep this operation manual accessible for reference.
To Next Page
Loading...
Need help?
General
