-45-
No.PF※※-OMJ0006-G
Other Settings
●Peak/Bottom value display
The maximum (minimum) instantaneous flow, from when the power was supplied to this moment, is
detected and updated.
In the peak/(bottom) value display mode, the maximum (minimum) instantaneous flow can be displayed.
For peak value display mode, when the button is pressed for 1 second or longer, the maximum flow will
be displayed flashing, and is held.
To release holding the peak value display, press the button for 1 second or longer to return to
measurement mode.
For bottom value display mode, when the button is pressed for 1 second or longer, the minimum flow
will be displayed flashing, and is held.
To release holding the bottom value display, press the button for 1 second or longer to return to
measurement mode.
If the and buttons are pressed simultaneously for 1 second or longer while the flow is being held,
the peak (bottom) value is reset.
●Zero Clear
The displayed value can be adjusted to "0" when the measured flow is within ±10% F.S. of the zero point at
the time of shipment from the factory.
(A tolerance of ±1 digit may apply due to individual product differences)
Press the and buttons simultaneously for 1 second or longer, to clear the display to "0". The display
will return to measurement mode automatically.
The accumulated value is "0" when accumulated flow is displayed.
To Next Page
Loading...
Need help?
General
