SMC Networks SMC8024L2 Management Guide

C ONFIGURING THE S WITCH
8
Rate Limiting Sets the rate limiting parameters for each port
on the Switch
25
Storm Control Sets the broadcast storm control parameters
for every port on the Switch.
23
Port Mirroring Sets up the port mirroring features of the
switch to enable traffic monitoring.
28
Cable Diagnostic Diagnoses cable faults. 29
TRUNKS 30
Membership Specifies ports to group into static trunks 31
Settings Configures trunk connection settings 31
Rate Limiting Sets the rate limiting parameters for each
Trunk configured on the Switch.
32
LACP Setup Sets link aggregation. 33
LACP Status Shows the LACP groups status. 34
VLANS 33
VLAN Membership Sets VLAN group. 35
VLAN Port Config Configures the VLANs on the switch for both
Ports and Trunks.
33
QOS 38
Settings Sets the priority of packets within the switch. 38
RSTP 40
Settings Sets up RSTP configuration. 41
Status Shows RSTP bridge and port status. 42
802.1X 43
Settings Sets up 802.1X configuration. 44
Statistics Displays the 802.1x statistics collected by the
switch.
46
Security 47
IP Filter Setus up IP filter. 47
Table 2 Switch Main Menu (Continued)
Menu Description Page

SMC Networks SMC8024L2 Specifications

General

Brand	SMC Networks
Model	SMC8024L2
Category	Switch
Language	English