A
BOUT
THE
T
IGER
S
TACK
II 10/100/1000
1-10
• Provides stacking capability via high-speed serial ports with 48 Gbps
stacking bandwidth. Up to 8 units can be stacked together.
Expandability
• Supports 1000BASE-SX, 1000BASE-LX and 1000BASE-ZX SFP
transceivers.
• Optional 10G single-port expansion module with an XFP transceiver
slot.
Performance
• Transparent bridging.
• Aggregate duplex bandwidth of up to 128 Gbps for the SMC8824M or
176 Gbps for the SMC8848M.
• Switching table with a total of 8K MAC address entries and 2K IPv4
address entries or 1K IPv6 address entries.
• Provides store-and-forward switching for intra-VLAN traffic, and IP
routing for inter-VLAN traffic.
• Supports wire-speed switching.
Management
• “At-a-glance” LEDs for easy troubleshooting.
• Network management agent
- Manages switch (or entire stack) in-band or out-of-band
- Supports console, Telnet, SSH, SNMP v1/v2c/v3, RMON (4
groups) and web-based interface
• Slave units provide backup stack management.
To Next Page
Loading...
Need help?
General
