SMC Networks ZK2-ZSV-A Series - Page 38

-37-
NO.ZK2-OM00501-B
Order of function of setting
Order
Function
1
Selection of display unit
2
Setting of output mode (OUT1)
3
Setting of reversed output (OUT1)
4
Setting of pressure (OUT1)
5
Setting of hysteresis (OUT1)
6
Setting of output mode (OUT2)
7
Supply pilot valve signal ON point
8
Supply pilot valve signal OFF point
9
Setting of hysteresis (OUT2)
Set the range in which the supply pilot valve input is prohibited
10
Setting of response time
11
Setting of display resolution
12
Setting of auto-preset
13
Setting of initialization of fine adjustment of display value
14
Setting of power saving mode
15
Setting of security code
: Return to measurement mode from any setting item by pressing the S button for 2 seconds or longer.