Smipack FP560 - Manual Sealing Procedure (FP560); Automatic Sealing Procedure (FP560 A-FP870 A)

Use and maintenance manual FP560 - FP560A - FP870A
33
a) FP560
To perform the sealing manually lower the sealing frame 1 and as soon as it comes into contact
with the sealing blade apply a pressure of about 10-15 kg. (see the following section)
b) FP560A - FP870A
To seal the film press the START button in order to activate the closure and subsequent
automatic opening of the sealing frame. (see the following section)
Fig. 4.7.2
Fig. 4.7.3