Chapter 4 - Preparing the machine for use
34
4.8 PACKAGING PRODUCTS
After having performed the first film sealing operation, introduce the product to be packaged in
the bag, placing it on the specific product support.
Use your left hand to feed through the film and your right hand to move the product into the
packaging area up to about 1-2 cm from the sealing blade, as shown in the figure 4.8.1.
To carry out the packaging operation proceed as described according to the machine model.
a) FP560
To perform the sealing manually lower the sealing frame 1 and as soon as it comes into contact
with the sealing blade apply a pressure of about 10-15 kg. At this point one can release the
sealing frame which will be kept closed by the electromagnets for the time set by the
programme and then will open by itself.
During packaging operations aid film detachment with your right hand, in order to prevent it
from sticking to the sealing blade in the cooling process.
The packaged product will then be evacuated via the conveyor belt which the machine is fitted
with.
To Next Page
Loading...
