Use and maintenance manual FP560 - FP560A - FP870A
39
To continue the packaging cycle, release the emergency button and press the .
5.5 SAVING A PROGRAM
Depending on the size of the product and the type of film you wish to use, some operating
parameters must be set in order to guarantee quality packaging. The operator can save up to
10 sealing programs (M1,..........M10).
The active memory number is visualised in the second row of the display (e.g. M1) and can be
changed by selecting followed by and .
Procedure for saving a program (memory M....)
• Select the programmable memory you wish to adjust (e,g. M2)
• Access the “parameters menu” of the active memory by pressing .
• Press several times to view all the parameters.
• Adjust the parameter values using the and keys.
Memorise the values set in the menu by pressing . If the operator does not press any
key for more than 5-6 seconds, the modified data will be saved automatically. When it has been
saved, the text “Wait……..” will appear on the display for a few seconds.
5.6 PARAMETERS MENU
After having chosen the programmable memory to be used (e.g. M1), press pto access
the machine operating parameters. Press pseveral times to view in succession the
parameters we will describe hereafter and use the and keys to modify the data.
1 • Sealing temperature
Menu for adjusting sealing temperature.
To Next Page
Loading...
