7
EEWB330B
1.5 STANDARD ACCESSORIES
Standard accessories ( Figures 1, 2, and 3,) included
with the EEWB330B are:
1
EAM0003J69A
Cone, 87-137 mm / 3.4”-5.4”
2
EAM0005D25A
Cone, 96-114 mm / 3.8”-4.5”
3 EAM0005D24A Cone, 71-99mm /2.8”-3.9”
4 EAM0005D23A Cone, 40-76mm / 1.6” -3.0”
5 EAC0058D07A Cup -Pressure
6 EAC0058D08A Disk -Pressure
7 EAA0263G66A Quick Nut
8 EAM0005D40A Weight -Calibration
9 EAM0021D90A Standard 40mm Stub Shaft
10 EAA0247G21A Caliper -Rim Width
11 EAC0060G02A Flange -Cover, Hook
12 EAM0006G01A Pin -Accessory
13 WWPR13A Weight Pliers
14 EAM0005D34A Fastening Rod
15 EAC0058D15A Soft Protector Ring
Figure 3 - Plier
Figure 1
Figure 2 - Rim width gauge
1.6 OPTIONAL ACCESSORIES
EEWB3-1A
Car
, SUV and Lt Truck Pin Plate Set
EEWB3-5 Spacer EEWB3-4
9-pc Collet Set
EEWB3-1A Car, SUV and Lt Truck Pin Plate Set
EEWB3-4 9-pc Collet Set
EAK0309J20A Stand
Weight Pliers (Figure 3).
Versatile weight hammer/plier. In addition to ham-
mering on weight and used weight removal, the
hammer/plier can be used to reshape worn weight
clips and trim weight to size.
To Next Page
Loading...
Need help?
General
