Snap-On EEWB332B User Manual

11
EEWB332B
Figure 11
Figure 12
3. Connect the plug of the cable with the connec-
tor of the machine which is projecting out of the
opening in the balancer cabinet. See Figure 1
1.
4. Place the harness loosely inside the machine
through the hole in the machine cabinet. See
Figure 12.
!!IMPORTANT!!!
Machines are shipped calibrated from the
factory. Do not attempt fi
eld calibration
unless balance results deem calibration
as necessary.

Snap-On EEWB332B Specifications

General

Brand	Snap-On
Model	EEWB332B
Category	Wheel Balancers
Language	English