Snom 300 - Maintenance Tasks; Administrator Password; Operation Modes

snom 3x0 VoIP Phones User Manual English
46 • Phone Configuration
© snom technology AG 2007
English
Maintenance Tasks
Administrator Password
 Warning: You need to know the administrator password to return to administrator
mode; otherwise you have to perform a reset to factory values! All current setting
changes will be lost! Use the following URL to reset the phone:
 http://<IPAddress>/advanced.htm?reset=Reset
Action: Change the Administrator Password via Web user interface
snom 300 snom 320 snom 360 snom 370
 Setup  Advanced  QoS/Security  Administrator Password: <Your Password>
 Setup  Advanced  QoS/Security  Administrator Password (Confirmation):
<Your Password>
Save by clicking on Save
Result: The administrator password has been changed.
Operation Modes
The default operation mode is “Administrator Mode”.
User Mode
User Mode limits the configuration rights, i.e. no access to parts of the menus on both
web and phone user interface.
Action: Enable
User Mode via Web or Phone User Interface
snom 300 snom 320 snom 360 snom 370
 Setup  Advanced  QoS/Security  Administrator mode: <OFF>
Save by clicking on Save
or
 Enter the settings menu and navigate
through the menu (see page 22):
 10 Maintenance  1 User Mode
not
supported
not
supported
Press
Result: User Mode has been enabled.