socomec ATyS C25 - 1 General Safety Instructions

4
EN
ATySController C25 - 549780A - SOCOMEC
1. GENERAL SAFETY INSTRUCTIONS
• This manual provides instructions on safety, connections instructions on the SOCOMEC ATyS C25 ATS
controller
• Weather the ATyS C25 is sold as a loose product, as a spare, in a kit or as part of an enclosed solution or in
any other conguration, this device must always be installed and commissioned by qualied and experienced
personnel, in line with the manufacturers recommendations, following good engineering practices and after
having read and understood the details in the latest release of the relative product instruction manual.
• Maintenance on the product and any other associated equipment including but not limited to servicing
operations must be performed ofoad by adequately trained and qualied personnel using the appropriate
protection equipment.
• Each product is shipped with a label or other form of marking including rating and other important specic
product information. One must also refer to and respect markings on the product prior to installation and
commissioning for values and limits specic to that product.
• Using the product outside the intended scope, outside SOCOMEC recommendations or outside the
specied the specied ratings and limits can cause personal injury and/or damage to equipment.
• This instruction manual must be made accessible so as to be easily available to anyone who may need to
read it in relation with the ATyS C25.
• The ATyS C25 meets the European Directives governing this type of product and includes CE marking on
each product.
• No covers on the C25 should be opened (with or without voltage) as there may still be dangerous voltages
inside the product such as those from external circuits.
• Do not handle any control or voltage sensing cables connected to the ATyS C25 when voltage may
be present on the product directly through the mains or indirectly through external circuits.
• Voltages associated with this product may cause injury, electric shock, burns or death. Prior to carrying out
any maintenance or other actions on live parts in the vicinity of exposed live parts, ensure that the switch
including all control and associated circuits are de-energized.
DANGER WARNING CAUTION
RISK:
Electric shock, burns, death
RISK:
Possible personal injury
RISK:
Equipment damage
The information provided in this instruction manual is subject to change without notice, remains for general
information only and is non-contractual.
Abbreviation and terms:
ATS : Automatic transfer switch (as dened in 60947-6-1)
ATSE : Automatic transfer switching equipment (as dened in 60947-6-1)
RTSE : Remotely operated transfer switching equipment (as dened in 60947-6-1)
HMI : Human machine interface (includes DIP switch and LED information available on the ATyS C25 front face).