socomec ATyS C25 - 3 Introduction

6
EN
ATySController C25 - 549780A - SOCOMEC
3. INTRODUCTION
ATYS C25 “ATS Controller” in association with an RTSE (Remote transfer switching equipment) forms an ATSE
(Automatic transfer switching equipment), the ATSE formed by the association is designed for use in power systems
for the safe transfer of a load supply between a normal and alternate source. When associated with SOCOMEC
RTSE the changeover is done in open transition insuring full compliance with IEC 60947-6-1, GB 14048-11 and
other international standards as listed. As a standalone product the ATyS C25 is compliant with IEC 61010-2-201
and is compatible with use with PC and CC type RTSE.
ATyS C25 “ATS Controller” Ensures:
• Monitoring of the availability of a Normal and Alternate source
• Supply to the controller and switch from the Normal or Alternate source
• Transfer orders to the RTSE and position reception from the RTSE
• A complete solution fully tested with SOCOMEC RSTE
• Intuitive HMI for emergency/local operation
• Clearly visible and indicated HMI
• Suitable for door mounting on the enclosure or DIN Rail mounting inside the enclosure
• Inherent electrical interlock between position orders
• Monitoring of the RTSE stable positions (I – 0 – II)
• Strait forward installation with effective ergonomics
• Power supply continuity for most Utility / Generator or Utility / Utility network applications when linked to an
RTSE (Remotely operated transfer switches).