ENGLISH
IOMMASGPXX01-GB_01
7
10-40 kVA
It is very dangerous to touch any part of the batteries as there is no isolation between the batter-
ies and the mains power source.
CAUTION!
A battery can present a risk of electrical shock and high short circuit current.
The following precautions should be observed when working on batteries:
B 3FNPWFXBUDIFTSJOHTPSPUIFSNFUBMPCKFDUT
b) Use tools with insulated handles.
c) Wear rubber gloves and boots.
d) Do not lay tools or metal parts on top of batteries.
e) Disconnect the charging source prior to connecting or disconnecting battery terminals.
f) Determine if battery is inadvertently grounded. If inadvertently grounded, remove source from ground. Contact
with any part of a grounded battery can result in electrical shock. The likelihood of such shock can be reduced if
such grounds are removed during installation and maintenance (applicable to equipment and remote battery
supplies not having a grounded supply circuit).
The product you have chosen is designed for commercial and industrial use only.
In order to be used for particular “critical applications” such as life support systems, medical applications, commercial
transportation, nuclear facilities or any other application or systems where product failure is likely to cause substan-
tial harms to person or property, the products may have to be adapted.
For such uses we would advise you to contact SOCOMEC UPS beforehand to conrm the ability of these products
to meet the requested level of safety, performance, reliability and compliance with applicable laws, regulations and
specications.
2.2 DESCRIPTION OF THE SYMBOLS USED ON THE LABELS APPLIED TO THE UNIT.
All the precautions and the warnings on the labels and plates on the inside and outside of the equipment should
be respected.
DANGER! HIGH VOLTAGE (BLACK/YELLOW)
GROUND TERMINAL
READ THE USER MANUAL BEFORE USING THE UNIT
2
SAFETY
To Next Page
Loading...
Need help?
General