socomec Masterys Green Power - Unpacking and Installation of the Unit; Shipping and Moving

ITALIANOENGLISH
8 IOMMASGPXX01-GB_01
10-40 kVA
UNPACKING AND INSTALLATION
OF THE UNIT
3
The packaging guarantees the stability of the UPS during shipping and physical transfer. Carry the packaged unit as
close as possible to the installation site.
When moving the unit on even slightly sloping surfaces, use the blocking equipment and break-
ing devices to ensure that the unit does not fall over.
3.1 SHIPPING AND MOVING.
r 5IF614NVTUSFNBJOJOBWFSUJDBMQPTJUJPOEVSJOHBMMTIJQQJOHBOENPWJOHPQFSBUJPOT
r 5IFVOJUIBTXIFFMTUIBUDBOCFVTFEUPNPWFJUGPSTIPSUEJTUBODFT
r &OTVSFUIBUUIFóPPSJTTUSPOHFOPVHIUPTVQQPSUUIFXFJHIUPGUIF614BOEPGUIFCBUUFSZDBCJOFUJGVTFE
Avoid pressing on the front panels when moving the unit.
The UPS MUST only be moved by two people at least. The people MUST take position at the
sides of the UPS with respect to the direction of movement.
CAUTION IF DAMAGED.
BATTERIES, NON SPILLABLE.
Packages, crushed, punctured, or torn such that contents are revealed
must be set aside in an isolated area and inspected by a qualied per-
son. If the package is deemed to be not shippable, the contents must
be promptly collected, segregated, and either the consignor or consignee
contacted.
All packaging material must be recycled in compliance with the laws in force in the country where
the system is installed.
Battery is NOT connected!