socomec NETYS RT 5000 User Manual

NETYS RT 5 - 7 - 9 - 11 kVA - 551570A - SOCOMEC
39
EN
6.3. Battery/ Battery Pack Replacement
1. Turn off the UPS and cut off the AC source before performing battery/ battery
pack replacement.
2. A battery can present a risk of electric shock and high short-circuit current.
3. Servicing of batteries and battery packs must be performed or supervised by qualied
service personnel familiar with batteries, battery packs and the required precautions.
Keep unauthorized personnel away from batteries and battery packs.
Replace the battery/ battery pack by following the procedures below.
1
Remove the screws and remove the battery pack’s front bezel
1
.
2
Disconnect the battery terminals
2
.
3
Use the insulated screwdriver to remove the screws from the protective cover
located in front of the battery
3
.
4
Pull out the battery from the left battery compartment and insert a new one. Follow the
same procedure to replace the battery in the right battery compartment
4
.
A minimum of two people are required to execute
3
and
4
.
1
N L
L N
UPS OUTPUT
AC INPUT
3
N L
L N
UPS OUTPUT
AC INPUT
4
N L
L N
UPS OUTPUT
AC INPUT
2
5
Reassemble the battery pack in reverse order.

socomec NETYS RT 5000 Specifications

General

Brand	socomec
Model	NETYS RT 5000
Category	UPS
Language	English