NETYS RT 5 - 7 - 9 - 11 kVA - 551570A - SOCOMEC
8
EN
1. SAFETY STANDARDS
1.1. Important
This manual should be kept in a safe place near the UPS, so it can be consulted by
the operator at any time for information that may be needed regarding correct use
of the unit. Read the manual carefully before connecting the unit to the a.c. mains
supply and the downstream appliances. Before the UPS is put into commission the
user should be completely familiar with its operation, the position of all the controls
and the technical and functional characteristics of the unit, so as to ensure there
will be no risk to people or the appliance itself.
This is a product for commercial and industrial applications in an industrial
environment – installation restrictions or additional measures may be
needed to prevent electro-magnetic interferences.
• The product you have chosen is designed for commercial and industrial use only.
In order to be used for particular “critical applications” such as life support systems,
medical applications, commercial transportation, nuclear facilities or any other
application or systems where product failure is likely to cause substantial damage or
harm to persons or property, the products might require compliance with statutory
regulations and standards, specic local by-laws and be adapted accordingly.
For such uses we would advise you to contact Socomec beforehand to conrm
the ability of these products to meet the requested level of safety, performance,
reliability and compliance with applicable laws, regulations and specications.
• Use the UPS in accordance with the technical specications indicated in this manual.
• The electrical installation must be entrusted EXCLUSIVELY to a skilled engineer,
following exactly the instructions provided.
• The UPS houses a source of electrical energy, namely its batteries. The output of
the UPS may be under power even when the appliance is not connected to the a.c.
mains supply.
Installation Warnings
• Before installation and usage, please read this User Manual thoroughly. This helps
you to use the product correctly and safely.
• Install the UPS in a well-ventilated area, away from excess moisture, heat, dust,
ammable gas or explosives.
• To avoid re accidents and electric shock, please install the UPS in a temperature
and humidity-controlled indoor area free of conductive contaminants. For the
temperature and humidity specications, please refer to Appendix 1: Technical
Specications.
• Leave adequate space (at least 50cm) around all sides of the UPS for proper
ventilation.
To Next Page
Loading...
Need help?
General