14- TYRES
14-1 CHANGING THE TYRES!: (Fig.8)
1. Lay the kart on a trolley.
2. Lay the wheel on the tyre removal tool (OU942.002)
3. Once the edges of the tyre are separated from the rim on
both sides, remove the tyre with the tool (2)!.
4. Put grease (3) ( LU823.003 ) on the edges of the new
tyre.
5. Install the tyre on the rim!; mind the direction of rotation.
6. Inflate to let the tyre get its position on the rim.
7. Adjust the pressure according to table next page , with
the manometer ( OU943.002 ).
Check the direction of rotation on the sides of the tyre.
Never inflate above bars!: there is a risk of severe injury due to potential failure of
the rim.
To Next Page
Loading...
