Sodi SR4 - Assembly of the Seat and Seat Stiffeners

- 10 -
SR4 MANUAL
6-ASSEMBLY OF THE SEAT AND SEAT STIFFENERS.
 The washers of the seat fixing kit comply with CIK/FIA and FFSA rules .
6-1 GROUND CLEARANCE
1
4 FIXING POINTS
20 mm
Measurements given below correspond to
the standard adjustment of the seat,
recommended by SODIKART, for the SR4.
Get the seat supports (1) closer , or wider,
depending on the seat size.
Use the shims of the seat fixing kit to get a
good fit.
1bar
KG
SEAT
GROUND