SEQUENCE OF ASSEMBLY AND INSTRUCTIONS
STEERING COLUMN AND STEERING WHEEL (chapter 4).
FUEL TANK AND OVERFLOW BOTTLE (chapter 5).
SEAT AND STIFFENNERS (chapter 6).
KG UNICO BODYWORK (chapter 7).
SODI BODYWORK!(chapter 8).
NOTE!:
Recommended tightening torques :
diam. 6 = 10 to 12 m.N
diam. 8 = 12 to 24 m.N
diam. 10 = 24 to 48 m.N
Do not overtighten screws and bolts
Screws without bolts are to be blocked with 1 drop of special glue (LU 861.001)
Lubricate rotating parts , ball joints, gas cable ….
To Next Page
Loading...
