EasyManua.ls Logo

Sodi SR4 - Trouble Shooting; Brakes do not work; The brake pads permanently touch the disk; The steering is hard

Default Icon
40 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
- 38 -
SR4 MANUAL
19- TROUBLE SHOOTING .
Brakes do not work :
1. Is the pedal working correctly ( not blocked )!?
2. Is the cap of the fluid reservoir tight !?
3. is the level of the brake fluid correct ?
4. Are the hoses correctly connected!?
5. Are the break pads worn out!?
6. is the calliper correctly tightened on its support!?
The brake pads permanently touch the disk :
1. Is the brake fluid old or black!?
2. Is the brake disk correctly aligned!?
3. Is the calliper well tightened on it’s support ?
4. Is the brake pedal free to rotate around it’s axis!?
5. Is the brake pads gap correct?
The steering is hard.
1. Are the screws of the stub axles tightened with the right torque!?
2. Is the caster too high!?
The steering of the kart is not precise.
1. Is the parallelism OK?
2. Are the steering tie rods bent!?
3. Is the plastic steering column support well tightened!?
4. Is the steering column support well tightened on the frame ?
The kart tends to go to the right or to the left.
1. Is the parallelism OK ?
2. Are the pressures of the tyres OK ( left vs right ) ?
3. Are the tyres diameter equal ( middle and sides )!?
4. Are the two block nuts of the steering tie rods well tightened!?
5. Are the tie rods bent!?

Related product manuals