4.4 TIGHTENING THE PLASTIC STEERING COLUMN SUPPORT.
Tighten the Chc M8x65 screw (8).
4.5 ASSEMBLY OF THE STEERING WHEEL .
Tighten the steering wheel (1) with the 3 FHc M6x30 screws, on the steering wheel support
(2).
Tighten the steering wheel support on the steering column.
Check!: once the steering system is assembled, please check that the steering wheel is free to
make a quarter of a turn right and left.
A bad assembly or a bad adjustment of the steering system can lead to accidents. Systematically
check the tightening of the system and its adjustment.
To Next Page
Loading...
