Sofarsolar SOFAR 7KTLM-G3 - Page 58

SOFAR 7K~10.5KTLM-G3 User manual
Copyright © Shenzhen SOFAR SOLAR Co., Ltd
- 53 -
input voltage of the inverter. If so,
adjust the number of PV modules in
series and reduce the PV series voltage
to fit the input voltage range of the
inverter. After correction, the inverter
will automatically return to its normal
state.
ID070
BatOVP
Battery over-voltage
Check whether the battery overvoltage
setting is inconsistent with the battery
specification.
ID071
LLCBusOVP
LLC BUS overvoltage
protection
Internal faults of inverter, switch OFF
inverter, wait for 5 minutes, then
switch ON inverter. Check whether the
problem is solved.
If no, please contact technical support.
ID072
SwBusRmsOVP
Inverter bus voltage
RMS software
overvoltage
ID073
SwBusIOVP
Inverter bus voltage
instantaneous value
software overvoltage
ID074
FlyingCapOVP
ID081
SwBatOCP
Battery overcurrent
software protection
ID082
DciOCP
Dci overcurrent
protection
ID083
SwIOCP
Output instantaneous
current protection
ID084
SwBuckBoostOC
P
BuckBoost software
flow
ID085
SwAcRmsOCP
Output effective value
current protection
ID086
SwPvOCPInstant
PV overcurrent
software protection
ID087
IpvUnbalance
PV flows in uneven
parallel
ID088
IacUnbalance
Unbalanced output
current
ID097
HwLLCBusOVP
LLC bus hardware
overvoltage
ID098
HwBusOVP
Inverter bus hardware
overvoltage
ID099
HwBuckBoostO
CP
BuckBoost hardware
overflows
ID100
HwBatOCP
Battery hardware
overflows