Software Bisque Paramount MX - Page 107

Paramount MX User Guide
107 | Page
Reboot For Indexing
Click this button to restart the Bisque TCS so that DC servomotor’s unique motor index angle can be
measured.
RA Index
Enter the motor index angle for the right ascension motor. If you know the already know the motor’s
index angle
Dec Index
Enter the motor index angle for the declination motor.
Measure RA (RA Button)
Click this button to measure the right ascension motor index angle.
Measure Dec (Dec Button)
Click this button to measure the declination motor index angle.
Save Indices To Bisque TCS
Click the button to save the RA Index and Dec Index motor index angles to the Bisque TCS firmware.
The motors and control system will not operate normally if the wrong motor index angles are saved, so
please double-check these values before proceeding.
Synchronization History
Each time the Paramount is synchronized on a star, the previous synchronization information is saved.
Figure 53: The Synchronization History settings on the Utilities tab.
This information can be very useful in case you have synchronized on the wrong star and need to restore
a previous synchronization.