SolarEdge StorEdge SE10K-RWS Installation Guide

Figure 5: LEDs
The following table describes system performance information by LED color and
ON/OFF/P switch position.
Indication
ON/ OFF/
P
Switch
Position
LEDColor
Comment
Red Green Blue
Power
optimizers not
paired
ON (1)
OFF Blinking
S_OK: ON
No S_OK: OFF
S_OK: ON
communication
with the
monitoring
platform is
established.
Pairing Blinking Blinking Blinking 
Wake-up/ Grid
Monitoring
OFF Blinking Blinking 
System
Producing
OFF ON
S_OK: ON
No S_OK: OFF

Night mode
(no production)
OFF Flickering
S_OK: ON
No S_OK: OFF

Inverter is OFF
(Safe DC)
 OFF (0)
OFF Blinking
S_OK: ON
No S_OK: OFF

Inverter is OFF
(DC not safe)
Blinking Blinking
S_OK: ON
No S_OK: OFF

Inverter
configuration
or reboot
ON / P ON ON ON 
StorEdge Three Phase Inverter MAN-01-00648-1.3
24 Inverter Interfaces

SolarEdge StorEdge SE10K-RWS Specifications

General

Topology	Transformerless
Max Efficiency	98.3%
Dimensions	540 x 315 x 260 mm
Noise Level	< 50 dBA
Protection Rating	IP65
Rated AC Power	10000 W
AC Frequency	50/60 Hz
Maximum Efficiency	98.3%
Number of MPP Trackers	1
Warranty	12 years
AC Output Power	10000 W
Operating Temperature Range	-25°C to +60°C
AC Voltage	230 / 400 Vac
Max Input DC Voltage	480 V
Communication Interfaces	Ethernet, RS485, ZigBee (optional)
Max Charge/Discharge Current	25 A
Max Charge/Discharge Power	10000 W
Communication	Ethernet, RS485, ZigBee (optional)