SolarEdge StorEdge SE10K-RWS Installation Guide

Contents
Disclaimers 1
Important Notice 1
Emission Compliance 2
Contents 3
Revision History 5
HANDLING AND SAFETY INSTRUCTIONS 6
Safety Symbols Information 6
IMPORTANTSAFETYINSTRUCTIONS 6
Chapter 1: Overview 10
The StorEdge Solution Components 10
Installation Equipment List 11
Inverter Transport and Storage 12
Chapter 2: Installing the Power Optimizers 13
Safety 13
Installation Guidelines 15
Step 1: Mounting the Power Optimizers 18
Step 2: Connecting a PV module to a Power Optimizer 18
Step 3: Connecting Power Optimizers in Strings 19
Step 4: Verifying Proper Power Optimizer Connection 20
Chapter 3: Installing the Inverter 21
Inverter Package Contents 21
Identifying the Inverter 21
Inverter Interfaces 22
Mounting the Inverter 26
Selecting a Residual Current Device (RCD) 28
Chapter 4: Installing the Battery 30
Chapter 5: Connecting the Inverter 31
Opening the Inverter Cover 31
Connecting the ACGrid 32
Connecting the Strings to the Inverter 33
Connecting the Energy Meter 34
Connecting the Battery 36
Closing the Inverter Cover 39
Chapter 6: Activating, Commissioning and Configuring the System 41
Step 1: Activating the Installation 41
Step 2: Commissioning and Configuring the Installation 42
Step 3: Verifying Proper Activation and Commissioning 44
Disclaimers 3
StorEdge Three Phase Inverter MAN-01-00648-1.3

SolarEdge StorEdge SE10K-RWS Specifications

General

Topology	Transformerless
Max Efficiency	98.3%
Dimensions	540 x 315 x 260 mm
Noise Level	< 50 dBA
Protection Rating	IP65
Rated AC Power	10000 W
AC Frequency	50/60 Hz
Maximum Efficiency	98.3%
Number of MPP Trackers	1
Warranty	12 years
AC Output Power	10000 W
Operating Temperature Range	-25°C to +60°C
AC Voltage	230 / 400 Vac
Max Input DC Voltage	480 V
Communication Interfaces	Ethernet, RS485, ZigBee (optional)
Max Charge/Discharge Current	25 A
Max Charge/Discharge Power	10000 W
Communication	Ethernet, RS485, ZigBee (optional)