SolarEdge StorEdge SE10K-RWS Installation Guide

Wireless Gateway, Wireless Repeater(s)
The Wireless Gateway collects inverter data using a dedicated Wi-Fi
connection and connects to the monitoring platform with the help of a
home router. Wireless Repeater(s) extend the Wi-Fi signal range between
the Wireless Gateway and inverter. Wireless Gateway and
WirelessRepeaters can be purchased separately from SolarEdge. For
more information, refer to https://www.solaredge.com/sites/default/files/se-wireless-
gateway-wireless-repeater-installation-guide.pdf.
Cellular
This wireless communication option (purchased separately) enables using a cellular
connection to connect one or several devices (depending on the data plan used) to the
monitoring platform.
The Cellular Plug-in is provided with a user manual, which should be
reviewed prior to connection. Refer to
https://www.solaredge.com/sites/default/files/se-cellular-plug-in-for-
inverters-with-setapp-installation-guide.pdf
ZigBee
This option enables wireless connection to one or several Smart Energy products, which
automatically divert PV energy to home appliances.
The Smart Energy ZigBee connections require a ZigBee plug-in and an external
antenna, available from SolarEdge.
The ZigBee Plug-in for Smart Energy is provided with an installation
guide, which should be reviewed prior to connection. Refer to
https://www.solaredge.com/sites/default/files/se-zigbee-plug-in-for-
setapp-installation-guide.pdf
The Smart Energy products are provided with an installation guide, which
should be reviewed prior to connection. Refer to
https://www.solaredge.com/products/device-control#/.
Creating an Ethernet (LAN) Connection
This communication option enables using an Ethernet connection to connect the
inverter to the monitoring platform through a LAN.
Ethernet cable specifications:
Chapter 7: Setting Up Communication with the Monitoring Platform 48
StorEdge Three Phase Inverter MAN-01-00648-1.3

SolarEdge StorEdge SE10K-RWS Specifications

General

Topology	Transformerless
Max Efficiency	98.3%
Dimensions	540 x 315 x 260 mm
Noise Level	< 50 dBA
Protection Rating	IP65
Rated AC Power	10000 W
AC Frequency	50/60 Hz
Maximum Efficiency	98.3%
Number of MPP Trackers	1
Warranty	12 years
AC Output Power	10000 W
Operating Temperature Range	-25°C to +60°C
AC Voltage	230 / 400 Vac
Max Input DC Voltage	480 V
Communication Interfaces	Ethernet, RS485, ZigBee (optional)
Max Charge/Discharge Current	25 A
Max Charge/Discharge Power	10000 W
Communication	Ethernet, RS485, ZigBee (optional)