SolarEdge StorEdge SE10K-RWS Installation Guide

StorEdge Three Phase Inverter - Technical
Specifications
SE5K-RWS / SE7K-RWS / SE8K-RWS / SE10K-RWS
(1)
 SE5K-RWS SE7K-RWS SE8K-RWS
SE10K-
RWS
Unit
OUTPUT
Rated AC Power Output 5000 7000 8000 10000 VA
Maximum AC Power Output 5000 7000 8000 10000 VA
AC Output Voltage — Line to Line
/ Line to Neutral (Nominal)
380/220 ; 400/230 Vac
AC Output Voltage — Line to Line
Range / Line to Neutral Range
184 - 264.5 Vac
AC Frequency 50/60 ± 5 Hz
Maximum Continuous Output
Current (per Phase)
8 11.5 13 16 A
Residual Current Detector /
Residual Current Step Detector
300 / 30 mA
Grids Supported — Three Phase 3 / N / PE (WYE with Neutral) 
Utility Monitoring, Islanding
Protection, Configurable Power
Factor, Country Configurable
Thresholds
Yes 
INPUT PV
Maximum DC Power (Module STC) 6750 9450 10800 13500 W
Transformer-less, Ungrounded Yes 
Maximum Input Voltage 900 Vdc
Nominal DC Input Voltage 750 Vdc
Maximum Input Current 8.5 12 13.5 16.5 Adc
Reverse-Polarity Protection Yes 
(1)
These specifications apply to inverters with Part number: SEXK-XXS48
StorEdge Three Phase Inverter - Technical Specifications 66
StorEdge Three Phase Inverter MAN-01-00648-1.3

SolarEdge StorEdge SE10K-RWS Specifications

General

Topology	Transformerless
Max Efficiency	98.3%
Dimensions	540 x 315 x 260 mm
Noise Level	< 50 dBA
Protection Rating	IP65
Rated AC Power	10000 W
AC Frequency	50/60 Hz
Maximum Efficiency	98.3%
Number of MPP Trackers	1
Warranty	12 years
AC Output Power	10000 W
Operating Temperature Range	-25°C to +60°C
AC Voltage	230 / 400 Vac
Max Input DC Voltage	480 V
Communication Interfaces	Ethernet, RS485, ZigBee (optional)
Max Charge/Discharge Current	25 A
Max Charge/Discharge Power	10000 W
Communication	Ethernet, RS485, ZigBee (optional)