SolarEdge StorEdge SE10K-RWS Installation Guide

Configuring Communication with the Energy Meter 44
Configuring Communication with the Battery 45
Running a Battery Self-test 45
Configuring StorEdge Applications 46
Chapter 7: Setting Up Communication with the Monitoring Platform 47
Communication Options 47
Creating an Ethernet (LAN) Connection 48
Creating RS485 Bus Connection 52
RS485 Bus Configuration 55
Verifying the Connection 55
Reporting and Monitoring Installation Data 56
Appendix A: Errors and Troubleshooting 59
Identifying Errors 59
Troubleshooting Communication 60
StorEdge Three Phase Inverter Troubleshooting 61
Power Optimizer Troubleshooting 62
Appendix B: Mechanical Specifications 64
Appendix C: SafeDC™ 65
StorEdge Three Phase Inverter - Technical Specifications 66
Support Contact Information 69
StorEdge Three Phase Inverter MAN-01-00648-1.3
4 Contents

SolarEdge StorEdge SE10K-RWS Specifications

General

Topology	Transformerless
Max Efficiency	98.3%
Dimensions	540 x 315 x 260 mm
Noise Level	< 50 dBA
Protection Rating	IP65
Rated AC Power	10000 W
AC Frequency	50/60 Hz
Maximum Efficiency	98.3%
Number of MPP Trackers	1
Warranty	12 years
AC Output Power	10000 W
Operating Temperature Range	-25°C to +60°C
AC Voltage	230 / 400 Vac
Max Input DC Voltage	480 V
Communication Interfaces	Ethernet, RS485, ZigBee (optional)
Max Charge/Discharge Current	25 A
Max Charge/Discharge Power	10000 W
Communication	Ethernet, RS485, ZigBee (optional)