32
6.4.2.5 Con guration
All available operating parameters and advanced functions of the inverter are listed in the
Con guration” menu. The settings displayed for the limit values and the functions depend
on the country selected during initial start-up.
NOTE
MaxTalk 2 Pro, the extension to the standard MaxTalk 2 software, allows authorised
skilled workers to individually adjust the operating parameters. The required “S series
parameter con guration using MaxTalk 2 Pro” instruction manual can be found on our
website www.solarmax.com (Downloads area). You can request MaxTalk 2 Pro from
the SolarMax Service Centre. The contact details can be found overleaf.
Parameter Description Unit
Country Country setting at the time of commissioning -
Plant type Plant type for the initial commissioning. -
Standard Operating standard for the initial commissioning. -
Vac min 1 Minimum admissible mains voltage ( rst limit) V
t Vac min 1 Release time for minimum admissible mains voltage ms
Vac max 1 Maximum admissible mains voltage ( rst limit) V
t Vac max 1 Release time for maximum admissible mains voltage ms
Vac min 2 Minimum admissible mains voltage (second limit) V
t Vac min 2 Release time for minimum admissible mains voltage ms
Vac max 2 Maximum admissible mains voltage (second limit) V
t Vac max 2 Release time for maximum admissible mains voltage ms
Vac 10min max Maximum admissible average value of the mains voltage over the last
10 minutes
V
f min 1 Minimum admissible mains frequency ( rst limit) Hz
t f min 1 Release time for minimum admissible mains frequency ms
f max 1 Maximum admissible mains frequency ( rst limit) Hz
t f max 1 Release time for maximum admissible mains frequency ms
f min 2 Minimum admissible mains frequency (second limit) Hz
t f min 2 Release time for minimum admissible mains frequency ms
f max 2 Maximum admissible mains frequency (second limit) Hz
t f max 2 Release time for maximum admissible mains frequency ms
df/dt max Maximum permissible mains frequency variation per second Hz/s
To Next Page
Loading...
