Need help?Do you have a question about the SolaX Power DataHub 1000 and is the answer not in the manual?
General| Max. Supported Devices | 1000 |
|---|---|
| Cooling Method | Natural Convection |
| Communication Interface | Ethernet, Wi-Fi, RS485 |
| Data Logging | Yes |
| Compatibility | SolaX Inverters |
General safety instructions, child supervision, and warnings against unauthorized access.
Appropriate anti-static measures should be taken to prevent damage to electronic components.
DataHub is monitoring equipment for photovoltaic systems, performing interface aggregation, data acquisition, storage, output control, and centralized monitoring.
Diagram illustrating DataHub ports and components with labels.
Explains the meaning of RUN, SERVE, and ALARM LED statuses.
Lists accessories, screw specs, and line specifications for various cables.
Specifies distance requirements for Wi-Fi and LAN connections, and wall constraints.
Instructions for mounting the DataHub on a flat, solid indoor wall.
Steps for mounting the DataHub onto a 35mm standard rail using screws and buckles.
Connects inverter to DataHub via RS485; recommends device limits and consistent communication settings.
Details on connecting RS485+ and RS485- to DataHub, including terminal pinouts.
Instructions for connecting Digital Input (DI), Analog Input (AI), and Digital Output (DO) signal cables.
Specifies network cable requirements and diagram for Ripple Control Receiver connection.
Schematic illustrating connections to the DRED system using various input/output ports.
Explains local and LAN login procedures, and default credentials for accounts.
Manage devices by adding inverters, meters, and monitors with serial port and address settings.
Query device data and access site settings including Export Limit, Power Control, and Other.
Limits power supplied to the grid, with 'Total' and 'Per Phase' control modes.
Explains 'Total' and 'Per Phase' modes for limiting total or individual phase export power.
Details 'Feed-in Buffer' settings with thresholds for managing grid power flow.
Introduces three functions: Active/Reactive Power, Remote Switch, and Parameter Setting.
Remotely sets inverter active/reactive power and reactive power modes like 'OverExcited'.
Control inverter switching and access advanced parameters via Modbus Opcodes.
Collects PV power data against different PV voltages for analysis.
Customizes 'IF-Then' logic for automated control of inverter and system actions based on conditions.
Guides on upgrading inverter firmware via DataHub using various file types.
Covers settings for network connection, system time, serial ports, and other configurations.
Details wired and wireless connection setup, including Wi-Fi configuration and fixed IP settings.
Configures system time and serial port parameters like baud rate and stop bits.
Manages platform settings, storage, and displays DataHub basic information.
Provides instructions for uploading and upgrading the DataHub firmware.
Offers methods to modify passwords, including 'Modify Password' and 'User Password Management'.
Resets DataHub to factory settings, clearing historical data and configurations.
Displays certification marks and states the standard 24-month warranty period.
Outlines warranty conditions and lists situations where warranty claims are excluded.
To Next Page