SolaX Power DataHub 1000 - 3.2.2 Indoor Wall Mounting; 3.2.3 Guide Rail Mounting

DataHub 1000 User Manual
5
*Note: When the Wi-Fi signal is weak, please install a Wi-Fi signal booster at the appropriate location.
3.2.2 Indoor Wall Mounting
1) Choose a flat and solid indoor wall to drill for installation;
2) Hang the DataHub on the wall with the cable connection area facing down.
(a)
(b)
( )с
( )d
Expansion bolts
3.2.3 Guide Rail Mounting
1) Use the four M3*L6 screws in the accessory bag to fix the buckle on the DataHub.
2) Please prepare 35mm standard rail (effective length ≥230mm) and install it firmly.
*Note: The outdoor installation must be in a waterproof housing.